General information

MEASUREMENTS (HEIGHT X WIDTH):

620 X 526 MM – VISOR ON LOW POSITION
640 X 526 MM – VISOR ON HIGH POSITION

FOR MODELS WITH ACC / WITH RADAR NOT COMPATIBLE with the ENDURO PACK. Interferes with the indicators in the lowest position.

Smoke
REF.21796H
$231.00

Clear
REF.21796W
$231.00

Dimensions (Height x Width): -

For models with ACC / with RADAR. COMPATIBLE with the ENDURO PACK.

Smoke
REF.22288H
Under development

Clear
REF.22288W
Under development

MEASUREMENTS (HEIGHT X WIDTH):

685 X 526 MM – VISOR ON LOW POSITION
705 X 526 MM – VISOR ON HIGH POSITION

FOR MODELS WITHOUT ACC / WITHOUT RADAR NOT COMPATIBLE with the ENDURO PACK. Interferes with the indicators in the lowest position.

Smoke
REF.21841H
$244.98

Clear
REF.21841W
$244.98

The Touring Dome is specifically designed for the BMW R1300GS, featuring larger dimensions compared to the original dome, along with the incorporation of Puig's universal 2.0 visor. This combination provides a significant increase in aerodynamic protection, allowing for multiple adjustments to suit each rider's preferences.

Its design surrounds the ACC radar device zone of the GS1300, with sharp edges that contribute to a more aggressive aesthetic, in line with the new design of the Bavarian maxitrail, and increased rigidity to the dome.

Edges in the deflector area separate the anchoring surfaces from the deflector surfaces in the central area, creating shapes that extend from the front towards the tank, allowing the air to be channeled to areas that do not disturb the rider.

With its installation, rider aerodynamic protection significantly improves without sacrificing the motorcycle's aerodynamic penetration coefficient, enhancing comfort in riding and reducing fatigue.

Puig's Touring Dome is available in transparent, light smoke, and dark smoke colors.

Designed and manufactured at Puig's facilities in Barcelona, it is made from durable 4mm thick CN acrylic material. The result is a lightweight and durable piece. It incorporates UV protection and 2mm rounded edges for enhanced rider safety and a better finish, complying with the stringent German TUV regulations.

With overall dimensions of 526mm width by 620mm height, depending on the visor position, there is an increase of 186mm in the high visor position and 133mm in the low visor position compared to the original dome. The Touring Dome is fully compatible with all BMW and Puig original accessories, including mirrors, handguard extensions, front deflectors, etc.

Its installation is straightforward, identical to the original dome, and can be done quickly without mechanical knowledge.

Puig recommends removing the original black deflectors for a cleaner visibility, as the Puig Touring Dome itself improves aerodynamic results in that area.

Includes installation instructions and aerodynamic study.

Replace your motorcycle’s windscreen with PUIG’s touring windscreen. Manufactured in acrylic of 3-4 mm according to the motorcycle model to guarantee maximum protection from the wind, improving the aerodynamics of the piece and possible debries that may impact you during your ride. In addition, it comes with a variable visor that will redirect the wind even more while achieving a great sense of comfort on board your machine. This visor is fixed to the touring windscreen by screws, since the screen comes with the holes already made to facilitate assembly. Note: not all touring windscreen models come with a visor.

The windshield has a rounded contour of> = 2mm, complying with the TÜV regulations.

For assembly, PUIG provides instructions with mounting tips, so you can quickly enjoy the touring windscreen on your motorcycle.